1 / 5
DIN rail holder for Shelly 3EM measuring coils — image 1
1 / 5

DIN rail holder for Shelly 3EM measuring coils

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIN rail holder for Shelly 3EM measuring coils

Rating
4 / 5
Likes
44
Downloads
368
Makes
2
Views
1,541
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

I designed the holders so that the measuring coils are neatly in one place in the control cabinet. 
A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. 

The holder holds very well on the DIN rail, and the measuring coil can simply be pressed into the holder. The holder is designed in a way that the measuring coil does not fall out after pressing it in (which works without much force).

I decided against a click mechanism, because it is not so robust. 

 

additional material:
4x M3 nuts
4x M3x12 screws (DIN 912 recommended) 

Tags