Glue Gun Holder for Wall storage system (Allit StorePlus and others)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a glue gun holder for your Wall Storage System. The current iteration hasn't been printed yet, I had to make…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a glue gun holder for your Wall Storage System. The current iteration hasn't been printed yet, I had to make adjustments to fit the the "trigger", irl I just made those adjustments with a file on my first test print so I could save some plastic, If you print this, please let me know how well it fits, so I can remove the "work in progress" warning. From my measurements it should fit, but I haven't tested it to save plastic waste. There are two holes on the top to store gluestick in, but since there's no guidance, they don't work very well. They still save some material, so I kept them.
Print lying on the side, with a 0.6mm nozzle, 0.8mm extrusion width, 0.4 mm layer height, plenty of nozzle temp for better adhesion and flow, some fan for better acuracy and overhangs. Keep your flow in check with the above settings, if you move your head too quickly, the extruder will skip!
If you want to support my work, consider leaving a tip or a friendly comment here on Thingiverse. :)
Category: Tool Holders & Boxes