Woodturning - Rotary Bowl Sander for 608 bearings - M8 version - 35 and 47mm pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix for more popular 608 bearings. Very handy sander, idea taken from the Hope Pro sander.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 107
- Makes
- 1
- Views
- 692
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third picture.
Therefore you will need an 8mm shaft (or threaded rod) with around 50mm length, two bearings, three washers and two M8 nuts (I suggest to use a lock-nut at the back.
The bearing housing prints flat on the bed, as do the sanding pads.
The sanding pads I have in 35 and 47mm diameter, just use som velcro and glue it to the front face with concact adhesive or use self adhesive velcro.
The prints needs a print pause after the space for the nut is fully printed to insert the nut. I also printed infill first, then perimeters, as the “overhang” over the nut enclosure would not really be printable otherwise.
For material, PLA seems sufficient.
Please note that I also have handles for attaching a vaccuum cleaner to, otherwise a simple wooden handle (also for M8) works fine. https://www.printables.com/model/247946-vacuum-through-handle-for-rotary-bowl-sander
Also there are holders for storing the sander on the wall!
If there is demand for other sizes of sanding plates etc. please comment.