1 / 3
Heavy Duty Center Insulator for G5RV or ZS6BKW Antenna — image 1
1 / 3

Heavy Duty Center Insulator for G5RV or ZS6BKW Antenna

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a heavy duty center insulator for a G5RV or ZS6BKW antenna.

Rating
5 / 5
Likes
11
Downloads
139
Makes
1
Views
667
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is a  heavy duty center Insulator for a G5RV or ZS6BKW antenna. It follows a common design to other models I have seen but it is much thicker and reinforced.

I printed this in ASA, since this needs to have some strength and survive outdoors. I would recommend ASA for this.

I printed this as strong possible so I printed it with 20 perimeters and full top and bottom layers all the way through - essentially a solid chunk of plastic. This is probably way overkill, so print as you see fit. Something in the vicinity of 4 - 5 perimeters, 4 -5 top and bottom layers, and 40% infill would more than likely be strong enough.

Tags