Cool Tubes! (Customizable Fan Duct)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Customizable fan duct tubing. Made in OpenSCAD with parameters.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 159
- Makes
- 2
- Views
- 584
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Cool Tubes!!!
Customizable fan duct tubing. Make whatever cool and exciting fan duct parts you need.
Open file in OpenSCAD to adjust parameters. I am not including pre-rendered files because there's too many possible variations.
PARAMETERS:
- DUCT
- ductThickness -- Thickness of the walls of the duct (mm)
- ductLength -- Length of the straight portion of the duct (mm)
- BEND
- bendAngle -- Bend angle of the bent portion of the duct (degrees)
- bendRadius -- Bend radius of bent portion of the duct. (mm)
- Measured to the inside wall of the shortest portion of the bend.
- FLANGE
- flange1 -- Enable flange (bool)
- flangePinLength1 -- Convert screw holes to pins (mm)
- 0 = hole. >0 = external pin. <0 = internal pin
- flangeAngle1 -- Rotate mounting flange 1 (deg)
- flangeThickness1 -- Thickness of mounting flange (mm)
- screwSpacing1 -- Distance between screws on same side. (mm)
- Measured center-to-center
- screwPinDiameter1 -- Diameter of screw hole (mm)
- innerDiameter1 = 134.8; // Inner diameter of duct (mm)
Flange 2 parameters are the same but have '2' as the last digit
Note: Flanges do not contribution to overall length to make it easier to measure. Flange 1 is connected to the straight portion of the duct and flange 2 is connected to the bent portion. If you want to eliminate the straight portion set ductLength = 0. If you want to eliminate the bent portion set bendAngle = 0;
Attribution: [Support for older versions of OpenSCAD](https://www.thingiverse.com/groups/openscad/forums/general/topic:17846#comment-1428834) thanks to Thingiverse user [thehans](https://www.thingiverse.com/thehans/designs).