Suncast Hose Reel Accessory Bracket for Spray Nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip on bracket to hold a small and large hose spray nozzle to certain Suncast hose reels.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket clips onto the crossbar of certain Suncast Garden Hose reels. The models have a crossbar above the reel, which is about 70 mm across (deep), with two 20mm slots design to hold the end of a hose in place when its not being used. A link to a picture of one of the compatible models is below. These hose reels also have a slide track guide to help guide the hose onto the reel when it is being rolled up.
This bracket clips into one of the 20mm wide hose slots, and provides storage slots for a large and a small spray nozzle. Before printing, make sure your hose reel has matching cross bar dimensions. This is designed to fit into the left slot as you face the hose reel, the larger nozzle slot to the front, and the smaller in back. Unfortunately, this design is not reversible, if you want to take advantage of the clips which hold the bracket in place.
I printed this in PETG with 20% infill. If you print it on its side as shown in the Prusa slicer screenshot, no supports are needed.
Compatible hose reel:
https://www.suncast.com/lgn200.html