1 / 5
PC4-M10 fitting printed substitute
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified spool2kool's design so it complies with the standard PC4-M10 thread and nut measures.
- Rating
- 5 / 5
- Likes
- 97
- Downloads
- 637
- Makes
- 9
- Views
- 2,133
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Modified spool2kool's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions (SpectreGadget's one shown in the photos).
Print recommendations:
Printed the clamp in PETG for aditional flexibility and durability.
Nut printed in PLA.
The clamp is designed to fit the usual 4mm OD ptfe tube. Depending on your printer tolerances and print quality, it could be convenient to rework the hole with a 4mm (1/64") drill bit so the tube can slide through.