1 / 2
SV06 Oldham Coupling Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for fitting Oldham couplings to your SV06's Z axis
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 167
- Makes
- 5
- Views
- 1,076
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a simple printable spacer to fill in the gap left when you move your stock POM leadscrew nuts onto an Oldham coupling. The spacers fit below the Oldham coupling creating a flush surface.
They have a 10mm hole to allow the leadscrews through and 3.2mm screw holes spaced 18mm apart so you can re-use the stock threaded inserts in the gantry part. You should be able to screw your Oldham couplings in with M3x10.
Print 0.2mm layer height and at least 1mm (or 5x) top and bottom layers.