HueForge Astronaut Gardening
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I generated this image using Midjourney, then using Hue Forge I turned it into this 3D printable art piece.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 163
- Makes
- 3
- Views
- 1,447
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you can process the .3mf file that's going to be the easiest way to print this. If you're just using the STL, it will be harder to do the color swaps. Unfortunately I don't know how to generate the STL in a way that allows for manual color swaps right now. I used an AMS unit to achieve these results. If the color layers don't come through correctly in bambu studio, you will need to right click the model in prepare mode and add height range modifiers. If you're new to Hue Forge I recommend watching a few tutorials on youtube to learn how to do this.
This was printed with these instructions from Hue Forge:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA filaCube Olive Green Transmission Distance: 1.5
PLA+ Esun Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Black until layer #9 at 0.8mm
Olive Green until layer #13 at 1.12mm
Orange until layer #23 at 1.92mm
White for the rest.