Ikea LACK HSW (Honeycomb Storage Wall)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is my attempt to bring the versatility of the HSW to the Ikea LACK table The HSW was designed by @RostaP
- Rating
- 4.364 / 5
- Likes
- 411
- Downloads
- 868
- Makes
- 11
- Views
- 7,121
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
List of parts to print and Commercial parts:
- 1-Left-Corner
- 2-Rigth-Corner
- 3-Strip-Honeycomb (x3)
Commercial Parts
- Self-Tapping Pan Screw #5 x 1/2" (x12)
- Self-Tapping Pan Screw #10 x 5/8" (x4)
I Left a table for references.
Print orientation:
Recommended orientation for printing as the image shows.
Print Settings
1.-Strip-Honewycomb
- Material: PETG (Recommended)
- Layer heigth: 0.2
- Perimeters: 4
- Infill density: 20%
2.-Corners
- Material: PLA
- Layer heigth: 0.2
- Perimeters: 4
- Brim: 3mm outside
- Infill density: 20%
Both corners should be printed with 3mm border and supports as shown in the image below.
Assembly
For assembly and installation, first place and fix both corners. Then slide a Strip-Honeycomb into both corners, lining up the #5 self-tapping screw holes.
Finally put the third Strip-Honeycomb in the center making sure it is tight and aligned with the others.
Note: Predrill all holes before screwing
If you like this design, you can go through my profile and see the others.
This project can also be complemented with my other design of Ikea LACK Tool
Ikea LACK Tool Table by Horacio | Download free STL model | Printables.com
Happy Printing!!!