1 / 2
TubeContainer with hexagon pattern
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tube container with a screw lid for pens, pencils, brushes or other things.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The tall one (for dare-devils to print) has inner height 198 mm, diameter 50 mm
15% infill
Due to two failed prints of the tall one I made a shorter version which can be attached to one another.
The short bottom container is of height 75 mm and the extension is 77 mm
So, you could build a tube to the moon though it may take some time :-)
I've also included a 50 mm container without hexagon pattern. With a lid you have a nice container!
It seems to be a little challenge with the hex pattern for the printer so keep it under supervision.