1 / 4
UMX Pitts Prop Hub ( Short Shaft ) — image 1
1 / 4

UMX Pitts Prop Hub ( Short Shaft )

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces original part on the Pitts but will probably fit many others.

Rating
0 / 5
Likes
4
Downloads
52
Makes
0
Views
192
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Manufacturer doesn't like to carry stock so this solves that problem.

I printed mine with PETG only because I had some laying around.  I'm sure any other type of filament will work just fine.    I used 100% infill and supports touching build plate only because of the hole for the small motor shaft that will need to have access.   The infill was easily removed with a tiny jewellers flat head screwdriver.   I also used a 1.65mm drill bit in a pin vice to enlarge all of the holes just a wee but so the screws would fit. 

I tried to break one where the originals always break and couldn't easily do it so that's a bit of satisfaction.