Webcam and ring light mount for Samsung C49RG90 ultrawide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-on mount with 6mm holes for webcams, lights and other gears. Fits the Samsung C49RG90 slots.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 56
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This mount clips between the front of the monitor and the slits found on the back.
I designed it for my Samsung C49RG90 but it could work on other Samsung ultrawide monitors provided they have the slits on the back positioned in the same way.
The distance of the slits from the top is not uniform so the mount will fit more snugly in some points, and more loosely in other points.
Print two legs and one plate. PLA works, I recommend 0.2mm layer height and 4 perimeters for a super tough print.
The plate stays in place comfortably by friction alone, but you could add a drop or two of cyanoacrilate just to be safe.
The holes in the middle of the plate comfortably fit the standard 0.6mm screw that most webcam/lighting equipment has. You can attach your equipment to the plate by inserting a M6 bolt in these. If you don't have any, you can print them from the attached STL (I recommend 100% infill).
If you make this and it fits on a different monitor, please let me know!