Yoshi Pixelart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Yoshi made from my small DIY 3D printable Pixels
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 98
- Makes
- 1
- Views
- 3,459
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning:
Use 0.2 mm height for the pixels and the clips. I tried printing it with 0.3mm height and the fit wasn't perfect anymore. ;)
You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4 (38)”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
Use the picture as a reference to find the right position of the blocks. It took me around ~ 1h to assemble.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
Unfortunately he can't “stand” on his own.
Have fun! :D