1 / 3
Titan submersible- mini keychain edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Titan Submersible design as a keychain miniature
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 63
- Makes
- 0
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Introducing the Titan submersible - Mini keychain addition
Made this model for a STEM workshop event, hesitant to make it at first, but surprisingly my team approved of the idea, and thus here we are. Happy printing.
MATERIALS:
- 1x keychain ring
- Super glue (or your glue of preference)
PRINTABLE PARTS:
- X1 Body
- X1 Lid
- X2 ThrusterUp
- X2 ThrusterForward
- X2 Support
- X2 Feet
MY PRINT SETTINGS:
- 0% Infill (if you want stronger print at 20%, for me, 0% is plenty strong)
- I use 0.6mm Nozzle width, 2 perimeters
- Generic PLA
- Sequential printing enabled (One by one printing)
- Seam position to “rear” (Find at print settings>layers and perimeters>Advanced>seam position). You must be in “expert mode” and orient print so that the face facing you is the good side and the seam at the rear.
