1 / 3
Refrigerator Door Bin 241H (LG MAN61844401) for LG LSC27925 Fridge — image 1
1 / 3

Refrigerator Door Bin 241H (LG MAN61844401) for LG LSC27925 Fridge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement door bins for LG LSC27925ST, LSC27937ST fridges

Rating
0 / 5
Likes
16
Downloads
144
Makes
0
Views
1,429
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202.

I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a printer at least that large. The two halves are connected using 4x of the provided pin model and:

  • a 1/4-20 threaded rod

  • 2x 1/4-20 nuts

I recommend setting your wall line count to 4 so that the side walls are printed solid. I set infill to 15%. I used tree supports touching the buildplate, but blocked out support for the pin holes and the long hole for the threaded rod (it's really hard to remove them if you don't). I also used a brim for bed adhesion, since my tree supports wouldn't stick otherwise. Using those settings and a 0.2 layer height, each half takes around 1 day, 15 hours to print and uses 378g of filament. I printed using Monoprice's PLA+, but I think normal PLA should work fine. 

I also made a short version since I wanted one that didn't need so much height. It takes each half around 1 day, 6 hours and 298g of filament to print.

Also note that you may need to slightly sand the protrusion near the bottom of the L-shaped part that inserts around the fridge's brackets (see last picture for location); my prints were too snug there and wouldn't insert easily.

I built these models in Tinkercad, so you can easily edit them there if you want.

Tags