Adapter for Dremel 575 right angle attachment on non Dremel stuff
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.45 net (excluding VAT)
For file: Dremel 575 short 34in-12tpi adapter_0.2mm_PETG_MK3S_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.41 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 31.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shorter BSF 3/4'' 12 tpi adapter for Dremel 575 right angle attachment on non Dremel stuff
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 84
- Makes
- 1
- Views
- 574
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Shorter BSF 3/4'' 12 tpi adapter for Dremel 575 right angle attachment on Dremel compatible stuff.
This tool could not be mounted on my compatible because the attachment was too long … So I created this model, just a bit shorter, better designed with F360 to fit my compatible perfectly.
Remark : in F360, a Whitworth tread library must be added with BSF 3/4" 12 tpi, class = standard or free, not class = medium or the thread will be too tight (at least with my printer) !
Some users consider that a thread of M18-2 can also be used but as for me, this one is a bit too loose …