Paremetric Doweling Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because the one size fits all isn't great... This is my preferred metohod for quick, easy and custom joinery.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 86
- Makes
- 2
- Views
- 631
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
The Parametric Doweling System
This is pretty self-explantory, but it's a way to transfer dowels from one workpiece to the other. I've never had much luck with dowel pins, but with these jigs I can usually get a pretty good fit. This is not intented to be a re-usable jig, every type of joint needs it's own jig.
Dowel distribution
By default the program will suggest a dowel distribution, using 4 dowels for the joint. It can be altered to using 1, 2 or any number of dowels you want. These automatic distributions
When joining stock of different sizes, you generally want to customizes your dowel placement, to get the correct offset or reveal in the project. Set the distribution to custom and dowel locations to where you want them.
distribution = "custom";
dowel_locations = [[0,0], [-10, 0], [10,0]];The origin of the coordinate system is at the center of the jig. So [0,0] is exactly at the middle of the jig.
About OpenSCAD
To use this model to its full potential, please install OpenSCAD (which is free and open source) on your computer. Then you can use these in depth instructions if everything isn't self-explanatory.