Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.27 – €2.78 net (excluding VAT)
For file: PRUSA_Logitech C270 Webcam Holder for Original Prusa Mini_0.15mm_PLA_MINI_2h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.53 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 2.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini/MK3/MK4...
- Rating
- 4.889 / 5
- Likes
- 111
- Downloads
- 555
- Makes
- 18
- Views
- 5,470
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts and order you can find in “Printed Parts (Recommended)” and “Assembly” section.
For MK4 i also can recommend my Logitech C270 Webcam holder and arm for Prusa MK4 Z-Axis (X-End-Clip).
Print instructions
Printed Parts (Recommended)
- 1x Improved Logitech C270 Manual Focus System
- 1x Base
- Arms (There a four different types A, B, C and C. From C, you need two):
- 1x Arm_A_50mm (or 70mm)
- 1x Arm_B_50mm (or 70mm)
- 1x Arm_C_50mm (or 70mm)
- 1x Arm_C_70mm (or 50mm)
- 1x Arm_D
Additional Parts (if you use only the recommended parts)
- 2x T-Nut 3030 M4
- 2x M4x10 Button Head Screws
- 5x M3x16 Cap Head Screws
- 1x M3x20 Button Head Screw
- 6x M3 Nuts
Assembly
- Remove Holder from Logitech C270
- Remove Aluminum Profile
- Insert T-Nuts
- Attach Basis
- Assembly Webcam Holder
- Arm_C
- Arm_A
- Arm_C
- Arm_B
- Arm_D
- Screw on Webcam
- Enjoy
Links
The links to Shops can be advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.
Credits
This is a improved version from knochen911