1 / 4
Zero G Mercury 1.1 - 40mm Dowel Conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After beginning to assembly my Mercury, I found that the pins were sloppy once sanded down
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 60
- Makes
- 1
- Views
- 1,398
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After beginning to assembly my Mercury, I found that the pins were sloppy once sanded down.
I decided to rework the entire design with 40mm dowels and close the clearance abit more around them so they are supported deeper into the mounts and remove any play.
Attached are the stl files for the Items, This was based off the Ender 5 Plus Step file from the ZeroG website.