Jolteon Pokemon Card HueForgery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jolteon pokemon card made with HueForge
- Rating
- 0 / 5
- Likes
- 97
- Downloads
- 421
- Makes
- 0
- Views
- 2,372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Joleton EX Pokemon Card, prepared for multicolour 3D printing using HueForge.
The included .3mf file can only be opened with Bambu Studio unfortunately.
Can be made with filament swaps, details below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Generic Black Transmission Distance: 0.3
PLA+ eSUN Blue Transmission Distance: 5
PLA+ eSUN Red Transmission Distance: 6
PLA+ eSun Orange Transmission Distance: 5
PLA+ eSUN Yellow Transmission Distance: 8
PLA+ eSun Cold White Transmission Distance: 1.5
Swap Instructions:
Black until layer #5 at 0.48mm
Blue until layer #8 at 0.72mm
Red until layer #12 at 1.04mm
Orange until layer #18 at 1.52mm
Yellow until layer #45 at 3.68mm
Cold White for the rest.