TAG PUCK: Discreet M5 bolt mounted AirTag holder for bikes and whatever else
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M5 bolt mounted AirTag case for bike or anything else with a 5mm sized hole
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 133
- Makes
- 1
- Views
- 1,450
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
There are many other models like it but I wanted to create my own. This model allows you to discreetly attach an AirTag to anywhere you can find a suitable M5 sized hole.
Required Hardware
- 3 M2x6 (ish) self tapping screws
- 1 M5 hex nut
- 1 M5 threaded bolt with length that makes sense to your application.
Assembly
- Print both halves of the case in a heat resistant material like PETG or a high quality HT-PLA
- Press hit an M5 hex washer into the bottom half of the case. The fit is pretty tight. I used a rubber mallet and dowel to mash it in there.

3. Place your AirTag into the case.

4. Place on the lid (make sure to line up the screw holes) correctly and secure with 3 M2 self tapping screws.
5. Secure onto a location of your choice using an M5 threaded bolt. I am using mine on my bike. If you also plan to use yours on a bike I recommend using some blue thread locker to reduce the chance of vibration shaking your tag loose.
