Ratcheting Paper Towel Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.04 – €3.71 net (excluding VAT)
For file: BASE_CAPandPAWL_0.2mm_PETG_MK3_3h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.37 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 3.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Paper Towel holder that can ratchet to ensure it unrolls only one way, as well as optional guide arm
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 1
- Views
- 642
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Not-so-simple ratcheting paper towel roll holder! With optional guide arm! Print either the ROLL_BASE_NOTCHED if you want guide and ROLL_BASE_SOLID if you don't want the guide arm. I've also included a TABLE_GRIP that can be added to any mounting system you want and glued in place. I recommend big rare earth magnets or adhesive strips, could add a 3d-printed clamp too but I was pressed for time.
PAWL can be flipped depending on if you want it to ratchet clockwise and not move counter-clockwise, or flip the PAWL over if you want it to create friction for the roll holder and move either direction. Built in spring, so no additional parts needed besides glue for the two ROD pieces to connect, or use a soldering iron to plastic weld, be sure to have ventilation if you go that route!
The most over-engineered paper towel roll you've ever seen, or your money back!