1 / 4
Dremel CNC electronic case (Lasercut)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for all the electronics of my DIY Dremel CNC.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 21
- Makes
- 0
- Views
- 413
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Disclaimer: This model of the electronics box is intended for use by individuals with advanced knowledge in electrical engineering. Proceed with electrical work and wiring only if you are confident in your expertise; otherwise, seek professional assistance.
Notes:
- the case was cut from 4mm plywood
- the covers for the ventilation were printed without top and bottom layers and hex infill
- you can adjust the files as you want and use your preferred manufacturing
Parts:
- E-Stop
- Toggle switch
- Fan
- EU outlet
- IEC Socket
- Arduino + CNC Shield
- Wago clamps
- 6x6 tactile buttons
- 12V ACtoDC PSU (If you use this one, remove the shell and it will fit perfectly)
Dimensions:
- Height 75mm
- Width 240mm
- Depth 81.5mm
Credits:
- the Icons from the top plate are from https://openmoji.org
- CNC Shield model https://grabcad.com/library/arduino-uno-cnc-shield-v3-a4988-suruculu-1
- Arduino Uno model https://www.cadcrowd.com/3d-models/arduino-uno
- Dremel CNC by Nikodem Bartnik https://indystry.cc