remixed D&D dice box with enclosed magnets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.87 – €5.95 net (excluding VAT)
For file: Base.enclosedMagnet_0.15mm_PETG_MK3S_5h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.41 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 5.43 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remixed box at 1.6 scale with magnet enclosures to hold the lid to the base.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Larger scale requiring a pause to insert the magnets so they are covered by a few final layers of plastic. magnet wells are 8x3mm I used 8x2 in my POC and the adhesion isnt as strong as I would like, so use 8x3 magnets if you can, or use a more substantial glue to raise 8x2 magnets closer to the surface. my main fear was that the magnets would impact the print head so I went conservative.
I found that the fit wasnt as tight as I would have liked, so I wound up gluing the magnets to the wells since they were drawn to the Prusa MK3S print head and popped out on the first pass.
EDIT: 4pmEST July 24. replaced the STL for the basic lid. one magnet well was only 2.9mm. they are all slicing the same way now.
I am including the ‘decorated’ lid, but I dont like the way the decoration prints at this scale. if your bridging game is strong, it might work for you.