1 / 5
Gridfinity 4x4 and 4x2 base French cleat mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grdifinity 4x2 base holder for 3/4" French cleat walls. Prints in 2 parts.
- Rating
- 5 / 5
- Likes
- 179
- Downloads
- 635
- Makes
- 7
- Views
- 4,098
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Two options for attaching back (cleat)
- CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue
- Hardware, made for ¼ bolts
- 2 x ¾" long ¼ 20 bolt
- 2 x ¼ 20 nuts
Design details:
- Skeletonized to minimize material requirements.
- Holes on the bottom serve to prevent dust accumulation
- Made for 3/4" plywood (note: 3/4" plywood is usually closer to 0.7" thick, or around 18mm).
- Designed around standard imperial specs common in most US shops (sorry world)
- Could easily be remixed for just about any mounting system
Print details
- Use snug supports just for the vertical holes, no other support needed (might even be able to get away with eliminating those)
- Adaptive layer height saves a bunch of time
- Printed great on a P1P, using Bambulabs Matte PLA