1 / 3
ESP32-WROOM-32U + SCD30 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32-WROOM-32U + SCD30 case with ventilation, micro USB and IPEX antenna holes
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 162
- Makes
- 0
- Views
- 1,579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to create a case for my ESP32-WROOM-32U which is connected to an SCD30 sensor.
It features:
- sufficient of ventilation holes and spacings
- a cut-out for a micro USB connector
- a hole for an IPEX antenna
- a small extrusion for the ESP status LED - depending on the material you print it, you will see it glow through the plastic
- enough space inside for all the wiring
Printing:
A 0.4mm nozzle is recommended. No support is necessary, all gaps can be bridged. To insert the hinge pins into the hole a hammer is helpful.