Adafruit ADXL345 accelerometer mount options for JGAurora A5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting adapters for the Adafruit ADXL345 accelerometer to both printhead and bed. FreeCAD files included.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Works well with the vanilla JGAurora A5 hotend, or any of my custom printheads for the JGAurora A5:
- Vanilla JG A5 hotend with Zesty Nimble Remote Direct Extruder V1.2
- E3D V6/Revo Six Hotend with Zesty Nimble Remote Direct Extruder V1.2
- E3D V6/Revo Six Hotend with The Orbiter v1.5 140g Dual Drive Direct Extruder (not yet published)
Additional required parts:
- 4x Ruthex RX-M2.5x5.7 threaded inserts
- 2x M2.5x5 hexagon socket head cap screw
- 1x M3x8 hexagon socket head cap screw
bearing-seat-cap_mountfrom my JGAurora A5 E3D drag knife mount [vinyl cutter] for the printhead-mount
Check out more JGAurora A5 upgrades in my JGAurora A5 mods Collection.
Wiring it all up
For details on how to connect the ADXL345 to a Raspberry Pi, please refer to one of the many examples available in the public. Personally, I went along with the instructions from Clip-On RP2040 Zero ADXL 345 Input Shaper Probe, finding proper protection for the RP2040-Zero in the description of Case for Adafruit QT PY RP2040 and Seeed XIAO RP2040 (for ADXL345).
Acknowledgements
While this is not a remix in the direct sense, inspiration was taken from the following models:
Example measurements
