Mold for a Silicone Sock for Dragon Hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a three part mold to produce a silicone sock for the DRAGON Hotend (Heater-Block) with 3mm Wall Thickness
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 49
- Makes
- 1
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This mold can be used to cast silicone socks for a DRAGON hotend.
The wall thickness of 3mm provides better insulation and the sock fits verry well so it cant get loose during printing.
Only use heat resistant castable 2 component (RTV) silicone.
(example and Amazon - Link to the silicone i used: https://www.amazon.de/TFC-Kautschuk-Dubliersilikon-mittelhart-hitzebest%C3%A4ndig/dp/B01MZ7EO1V/ref=sr_1_23)
This silicone cannot be used in SLA/DLP made molds, it will not cure in it!
No release agent is required, the cured silicone can be easily detached from the plastic (PLA/PETG).