The Filter - remix for another kind of Pogo pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just remixed it for my personnal needs.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 155
- Makes
- 3
- Views
- 1,497
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wasn't intended to publish, but since some people asked me on VoronDesign for the files, i have decided to share it. I got the steps from github and the missing one directly from nateb16 (nate5815 on discord) that i greatly thanks for his amazing job.
Since the original version was designed for this type of Pogo, and that i didn't want the USB cable at the back, i have decided to remix it for this kind of Pogo (ø 10 mm / 3A / 2 pins / 5 mm deph) and the original wasn't adapted for.
Remixed then :
- the center filter housing
- the center mounting bracket
- the left side mag mount
- the right side mag mount
Else was ok (all Lids, left and side housing) and can be found there : https://github.com/nateb16/VoronUsers/tree/master/printer_mods/nateb16/THE_FILTER
Pogo i used (will need 3 if you are planning to install side and center and only one if center only) : https://fr.aliexpress.com/item/1005004182554268.html?spm=a2g0o.order_list.order_list_main.75.19be5e5bDBANyI&gatewayAdapt=glo2fra
Also you can find on my printables the Hub and the wiring guide i used on my pics.
I also ran quite some measurements before and after installing The Filter (to compare to Nevermore V5) to see the improvement. Had 2 NTC 100 K thermistor, one at the back of the gantry, and one at the top front of the frame near the doors. I can assume that Nevermore is heating/blowing to the top of the enclosure first, when The Filter is heating/blowing to the middle of the enclosure around the gantry/head, then the top of the enclosure. That's obvious you would say. But actually, it clearly heating almost 1.5x to 2x faster than Nevermore (obvious again with 2 more fans).
On the graph i compared (with the 2 thermistor each time, during 1 hour heatsoak) :
- With Nevermore V5 and no bath towel (cheap tip to improve insulation) on Voron
- With Nevermore V5 with bath towel on Voron
- The Filter 4 fans with bath towel
You can see the graph on the pics i joined as well.