IKEA RINNIG kitchen utensil rack base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So you have your shiny (not really) new (not really either) RINNIG kitchen utensil rack (not quite a rack in my line…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 58
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So you have your shiny (not really) new (not really either) RINNIG kitchen utensil rack (not quite a rack in my line of business), but hate that it drains all water straight onto your counter top, leaving ugly water stains wherever it goes (it doesn't wander around much, fortunately)?
Then the "IKEA RINNIG kitchen utensil rack base" (hey, i didn't come up with the name, at least not most of it) is there for you!
Print it, put it under your RINNIG (i know that there are other RINNIG products, but i guess you know by now which one of them i mean), and... well, probably dump it out every once in a while. Maybe before it flows over. That's it.
There are dents for the feet, so it should stay centered nicely. Lots of fillets to prevent gunk from accumulating in the corners. (That was a hint that you should probably clean it from time to time.)
Other than that, it's just a dumb base for the, you guessed it, RINNIG kitchen utensil rack.
Maybe stick some rubber feet under it, though... in case it overflows. ;-)
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
How long do you want to wait?
Infill:
Anything above 10% is probably fine
Filament:
I'm not judging you... PLA should be fine, PETG may be the better choiceblack? wood may look cool? what does your kitchen look like?
Notes:
You'll need a big bed for this one, as it's 309x88mm (roundabout).
Works fine on a 30x30 bed, if your rotate it diagonally
Category: Kitchen & Dining