Sword Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sword Mount for Swords..
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 250
- Makes
- 2
- Views
- 2,096
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for swords, size can be customized.
Printing:
-Does not need supports, print all parts on flat surfaces → Picture→PartsAlignment
-Print with at least 6 or more Perimeters, for more stability.
-I would recommend 50% Infill ore more.
-Print material recommenced PETG ore stronger material. Print with the highest material temperature recommended, helps with bonding the layers more together hence more stability
Assembly:
See Picture → AssemblyGuidePicture
-To protect the wall you can make dampers and clue them in the socket shown in the Assembly Guide
-For my Mount. I only installed it on 1. Hole Because my wall is strong, you can however use all 3 holes iv you like, but you can't then rotate the mount easily. For The Screw, i used a 5mm Diameter with 50mm length. that should be quit enough.
-For your Mount, when you got no experience, just ask in a craftsman shop/store, tell them which wight and Wall Material you want to mount the sword on and which screw and dowel you should use.
This Work is inspired by the User: Arkham Forge and his Sword-wall-mount:
https://www.printables.com/model/18736-universal-sword-wall-mount