1 / 2
Stand for Valeton GP 100 guitar effects processor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Got a Valeton GP 100 and created a simple stand for it
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 59
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
Got a Valeton GP 100 and wanted to place it on top of my old Marshall amp, but there was the carriyng handle in the way. So I created this simple stand for the guitar pedal.
Printing instructions
- Print “Stab.stl” 2x with 40% infill
- Print “Seite-L” (left side) and “Seite-R” (right side) with 15% infill. No supports needed, if necessary rotate the thing so that the bigger surface is down on the print bed.
Assembly instructions
Put the two sticks in the holes of the left and right side and put the stand together. You can use glue if you want, but it is not needed since the stick holes are 22mm deep.