1 / 1
Nozzle holder M6x0.75
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nozzle holder for M6x0.75 mm nozzles
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a nozzle holder for the oddball M6x0.75 nozzles that my CR10 max uses, so i designed this little holder/plate.
I've modelled the threads and made them slightly over sized so that it should be possible to screw the nozzles in by hand in the first try.
If the threads are a bit tight when there is room between the holes for a ¼" 8mm socket.
I printed mine with 20% infill and 0.12 layer height with a 0.4 nozzle.