Drill Winding Adapter for Schacht Shuttle Bobbins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter will allow you to wind your 5" Schacht shuttle bobbins on any modern cordless drill. Print it on its side…
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 44
- Makes
- 1
- Views
- 307
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This adapter will allow you to wind your 5" Schacht shuttle bobbins on any modern cordless drill.
Print it on its side with a flat side down, and no supports are required. Low to medium infill. It's designed so that it'll have maximum strength when printed on a flat side.
It might work with other bobbins up to 7" in length with a 7.85mm internal diameter as well, though those longer bobbins will stick off the end of the adapter.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
0.25mm is fine
Infill:
15% worked for me
Filament: Eryone PLA Glitter Blue
Notes:
Print on its side, one of the two flat sides. This allows the layers to be continuous along the length of the adapter and maximizes strength.
Category: DIY