EEW Nano Battery Base for TalentCell 12V/6000mAh USB Battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a battery case to mount a TalentCell 12V/6000mAh USB battery (affiliate link:…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a battery case to mount a TalentCell 12V/6000mAh USB battery (affiliate link: https://www.amazon.com/gp/product/B00ME3ZH7C/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00ME3ZH7C&linkCode=as2&tag=snortimer0a-20&linkId=433046d7601bf1a3f831ab01ca3ccd69 ) under an Electric Eel Wheel Nano by Dreaming Robots (Thingiverse: mribble). You can see the battery lights through one of the top slots.
It requires six 1/2" #8 pan-head screws to clip the battery in and attach it to the Electric Eel Wheel Nano. These ones work: https://www.mcmaster.com/92470a194
You'll need supports, since there are overhangs, and I do recommend printing the main part of it flat with the opening upwards (as in the file). Print the clip flat.
As I'm just now printing the first test of this, the design may change. Feel free to print it and test it for personal use (non-commercial at this point).
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
100-250 microns
Infill:
15-25%
Filament: N/A Any N/A
Category: Parts