Juxtaposed Y-splitter for Bambu Lab X1C (smaller inner diameter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the juxtaposed y-splitter for Bambu Lab X1 and P1 series printers, with smaller PTFE inner diameter entry.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 102
- Makes
- 3
- Views
- 1,065
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
The juxtaposed Y-splitter by @RomainSCHWALL_687256 fixed my AMS retraction issues with PLA-CF, but in turn I had issues with non-AMS filament through the bypass path hitting the edge of the PTFE tube. This remix makes the inner diameter of the splitter's exit slightly smaller, which hopefully is fully within the hole part of the tube. It works for me, but if you didn't have a problem with the original, just use that since this may increase friction.
(To test for the issue: with the printer-side tube fully inserted into the connector, try to feed filament, in particular some stiff filament like PLA-CF, through the bypass funnel. If it goes through smoothly all the way, everything's fine, but if you feel a sharp increase in resistance before it comes out the other end, this remix may help.)