Filament Storage Bracket using Dowels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bracket that uses two 7/8" dowels to be used for filament storage or anything else that can be set on it.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 396
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Bracket to be printed in a pair, sized to fit standard 7/8" dowels from any hardware store or pipe/tube with the same OD. Mounting holes are meant to use standard #8 countersunk wood screws. I've only used 2 brackets with full length dowels and have had it fully loaded with filament with no issues. The brackets are screwed into studs but I'm sure drywall anchors would be secure as long as the expectations were kept in check. I have seen similar brackets but the dowel size wasn't one I could find locally or they had extra printing I didn't want to do.
On my ender 3 max I was able to nest both brackets but smaller printers may need to print one at a time.
.2 layer height and standard settings were all I used.
Happy Printing