Philips Hue outdoor cable caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Caps compatible with the Philips Hue® outdoor connectors, to avoid rust and corrosion.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 69
- Makes
- 2
- Views
- 333
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Description
I needed to keep my Philips Hue® outdoor LED strip unplugged in the garden, and I decided to print a little cap to screw on the connector to avoid ruining it with humidity and weather. The M15x1 thread seems hard to print, but with the correct settings I had no trouble bringing it done.
Print instructions
The model in the photo was printed with a .6 mm nozzle, 2 perimeters, Arachne-generated perimeters, adaptive layers, and .15 mm base layer height. The result was optimal, and got screwed on the connector pretty easily. Since it got finished with this nozzle, a .4 nozzle or smaller could only improve quality.