1 / 1
hydroponic end cap 110mm x 54mm ducting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've made this end cap to print out in one go only supporting under the nozzle, flip it and use an input and output
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 99
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I've made this end cap to print out in one go only supporting under the nozzle, support to the build plate only. you can flip it and use an input or output. print with the large flat side to the bed