Rick and Morty Portal - Extruder Visualizer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.26 – €0.31 net (excluding VAT)
For file: swirl-portal_015mm_pla_mk3s_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 24.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I decided my Prusa MK3s needed a really cool extruder visualizer - and decided to design an animated Rick and Morty…
- Rating
- 5 / 5
- Likes
- 127
- Downloads
- 363
- Makes
- 2
- Views
- 4,419
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided my Prusa MK3s needed a really cool extruder visualizer - and decided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action.
Please see the Prusa Blog for details on building the inner, spinning, "swirl"
Print instructions
"Swirl" was printed in Inland PLA - Peak Green.
"Fixed Portal" was started with Inland PLA - Light Blue, and then changed to Inland PLA - Dark Green once the layer change was signaled. This allows for a really nice color version of the swirling portal.
The "Fixed Portal", when complete, will attach to the extruder housing directly. Then, using the previously mentioned Blog steps, the "Swirl" print was attached to a mini-magnet and connected to the extruder motor shaft.