Dewalt Router DCW600 adapter plate for Festool LR32
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate to attach a DCW600 20v Dewalt router to the Festool LR 32 hole drilling plate.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 79
- Makes
- 0
- Views
- 1,316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
What the title says.
Spacers are used between the plate and the knobs, as the aluminum spacers which come with the kit are too large to use with the plate.
The collet adapter is used on the centering mandrel (part of the festool kit) to center the router on the plate. there is some purposeful slop on the plate holes to allow alignment with the mandrel. Tighten the knobs down once centered using the mandrel.
I had to rotate the router 45 degrees to allow clearance for the festool hold down knobs and give clearance for the dust extractor part as well.
the TSO version of this plate is in-line, but that requires additional lower profile bolts.