cr10s ultimate upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2-in-1 upgrade for creality cr10s (and maybe others). Direct drive and auto leveling using nozzle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 1,431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A 2-in-1 upgrade for creality cr10s (and maybe others). Direct drive and auto leveling using nozzle.
Uses "SIMAX3D Dual Drive BMG Bowden Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printer kit" from amazon.com:
https://www.amazon.com/SIMAX-3D-Extruder-Performance-Upgrading/dp/B07TZ3Z83S/ref=sr\_1\_6?crid=3O5H4HY5LPJM0&dchild=1&keywords=dual+drive+extruder&qid=1591725821&sprefix=dual+drive%2Caps%2C159&sr=8-6
and the motor:
https://www.amazon.com/Bipolar-Motor-18Ncm-25-5oz-17HS10-0704S/dp/B01LESPDCQ/ref=sr\_1\_1?crid=2G4AEUSGA9IGI&dchild=1&keywords=nema+17+stepper+motor+pancake&qid=1591729621&sprefix=nema+17+%2Caps%2C186&sr=8-1
And fan:
https://www.amazon.com/SoundOriginal-0-10A-0-15A-Humidifier-Aromatherapy-Replacement/dp/B071WMHNG5/ref=sr\_1\_3?dchild=1&keywords=3d+printer+cooling+fan&qid=1591727002&sr=8-3
And the switch from the filament run out sensor (because of the LED light).
Print instructions
Category: 3D Printer Extruders Summary
A 2-in-1 upgrade for creality cr10s (and maybe others). Direct drive and auto leveling using nozzle.
Uses "SIMAX3D Dual Drive BMG Bowden Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printer kit" from amazon.com:
https://www.amazon.com/SIMAX-3D-Extruder-Performance-Upgrading/dp/B07TZ3Z83S/ref=sr\_1\_6?crid=3O5H4HY5LPJM0&dchild=1&keywords=dual+drive+extruder&qid=1591725821&sprefix=dual+drive%2Caps%2C159&sr=8-6
and the motor:
https://www.amazon.com/Bipolar-Motor-18Ncm-25-5oz-17HS10-0704S/dp/B01LESPDCQ/ref=sr\_1\_1?crid=2G4AEUSGA9IGI&dchild=1&keywords=nema+17+stepper+motor+pancake&qid=1591729621&sprefix=nema+17+%2Caps%2C186&sr=8-1
And fan:
https://www.amazon.com/SoundOriginal-0-10A-0-15A-Humidifier-Aromatherapy-Replacement/dp/B071WMHNG5/ref=sr\_1\_3?dchild=1&keywords=3d+printer+cooling+fan&qid=1591727002&sr=8-3
And the switch from the filament run out sensor (because of the LED light).
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
</div>Rafts:Doesn't Matter
Supports:
Yes
</div>Resolution:0.2mm
Infill:
30%
</div>Filament:
any abs + / pro any
Notes:
supports from build plate only.
4 perimeters.
tools:
- drill and drill bits
- screw drivers (depends on screw types)
- alen keys/drivers
- soldering iron & solder
for other parts see directions.rtf