Sponge drill chuck adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts sponges into your electric drill.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
An adapter to attach a wonder/miracle/melamime sponge to a drill. Much faster than doing everything by hand.
Designed for a sponge measuring approx 57x107x26 WxLxH
Additional hardware required:
Two washers, nut and bolt. Designed for M6 but smaller should work also.
Highly recommend using a reusable ziptie also. Find one with a spring lever release so you don't waste plastic. The adapter will work without a ziptie but if you're not careful the sponge will slip out.
Print with 99% concentric infill for strength. PLA+ has given me a part strong enough to weather occasional impact.