G1 Insight dash mount 17mm ball - iOttie phone mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turns out that ProClip uses the standard AMPS hole pattern. Made a quick model with a 17mm ball that will fit iOttie…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Turns out that ProClip uses the standard AMPS hole pattern. Made a quick model with a 17mm ball that will fit iOttie mounts (as well as many others). Offset to keep the phone up and out of the way of the hvac controls. Works perfectly in ABS, probably will work just as well in PETG.
I couldn't tear the ball mount off with my hands on a test print, and it's very rigid. No bounce while driving. I do recommend gluing the ball mount plate to the dash mount, just to avoid the part flexing in the center.
Print Settings
Printer:
Seckit SK-Go
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament:
IC3D ABSBlack
Notes:
Printed solid, 6 walls/top/bottom, 100% infill. I recommend printing the dash mount solid as well.
Category: Automotive