1 / 5
Autel Nano Multicharger Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The design of the Autel Multicharger for the Nano Drone is very minimal, lets say.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 113
- Makes
- 1
- Views
- 367
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The design of the Autel Multicharger for the Nano Drone is very minimal, lets say. This case adds only a minimum of more space required in your bag but gives a much saver/better feeling when plugging in the batteries. Print time was arround 4hours. The design is optimized for 0.5mm wide lines and 1.5mm wall thickness.