1 / 7
iPhone Magsafe Stand (both horz and vert)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended the column and beefed it up a bit. Also, ran the cable cutout all the way down with a filament slot to hold it
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Put a hole in to be able to punch out the Magsafe if you want.
- Extended the shaft to allow for vertical mounting of iPhone
- Ran the cable cutout all the way down and through the base
- Added a hole to insert a piece of filament to hold the cable to the base. Flush cut
- Rounded some edges to make it a bit more sleek
You can remodel if you want using OnShape - https://cad.onshape.com/documents/873c57eaa8e7e834b09f9d12/w/3f0033b329c72571a80ac0f6/e/5e0340daa4b2480e11218c4e?renderMode=1&uiState=64c57968cc2d8a3a06774804