LoveBoard Cover With Nozzle Swap Hinge (needs work)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A helpful hinge to allow access to the two plugs needed to swap the nozzle and not remove the cover completely.
- Rating
- 4.889 / 5
- Likes
- 87
- Downloads
- 303
- Makes
- 23
- Views
- 1,808
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Fits just like the original one does but now allows easy access to the two plugs needed for a nozzle swap.
Only the body needs support and only for the hinge
Hardware needed:
- M3nN
- MK4 kit should have an extra
- M3x12 bolt
- MK3S+ upgrade kit should an extra
- Either of the MK4 kit's extra M3x16 or M3x14bT bolts work fine, just has some extra screw length sticking out the front.
Update 8/20/2023:
Added a combined LoveBoard Cover and X-Carriage back file to make things more robust. I haven't thoroughly tested it yet but seems like it will need a slightly longer m3 bolt than the initial version.
Update 12/11/2023:
A handful of people have brought up the various deficiencies this design has, I've done everything so far with just TinkerCAD and don't have the expertise/creativity to actually make a good solution to the presented issues.