6mm Rivet for Pirate chest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 6mm wide rivet for pirate chest organizer
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 81
- Makes
- 1
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
THESE MAY NOT BE EASY TO PRINT FOR EVERYONE.
I designed this rivet specifically to go with the fantastic pirate chest model designed by @Muddymaker which can be found here https://www.printables.com/model/517309-pirates-treasure-chest You may find other uses for them, but my intended use was to add another feature to the chest model.
You will need to print 60 of these rivets to cover the chest.
These are designed to be a fraction of a mm shorter than the depth of the holes in the chest pieces, narrow enough to allow glue to surround them and wide enough to cover the holes and any minor glue squeeze out. Again, these are not easy to print. The bed contact surface of the rivet is 3.5mm (accounting for the fillet). They should be printed with brims and supports, and the supports may have to be done manually if your slicer does not recognize the overhangs.