Weller WE1010 Soldering Iron Tip Caddy Backpack for Base. Holds 9!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you have more tips for your Weller WE1010 iron than space in the factory holes? This should help! Hold 9 more!
- Rating
- 4.8 / 5
- Likes
- 15
- Downloads
- 74
- Makes
- 4
- Views
- 419
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Built to match the form factor of the soldering iron holding base for a complete look.
Material, fill percent, and layer height are flexible.
The copy shown was printed in PETG with 0.35-mm layer height and 50% fill.
The holes as printed are slightly undersized since they are so close together to maximize the number it can hold. I use a Milwaukee metric step drill bit (4-mm to 12-mm in 1-mm increments, part number 48-89-9301) to clean up the holes for a perfect fit!
I removed the soft rubber feet from the bottom of my iron base and tapped out the existing holes in the base to M5X0.8-mm (no drilling required, Anchor Lube as tapping lubricant). I used two M5X20-mm button head stainless screws to hold the caddy to the base. The screws do not need to be that long, but I had them on hand. Clean out the lubricant and chips, reinstall the rubber feet and project completed!